Flipper's Parts Store  
 Categories
 Payment in USD or CAD
 Quick Find more
 

Advanced Search

View All Items
 What's New? more
5V Power Supply
5V Power Supply
 $42.15USD 
 Manufacturers
6264 NVRAM Module for Gottlieb System 3
Model: PinitechGottliebSys3
 $24.95USD 

Description

NVRAM Module for Gottlieb Sys3

 

No More Batteries!

This is a premium quality nonvolatile RAM (NVRAM) Replacement for Gottlieb System 3 Pinball Machines. Replaces the 6116 / 6264 RAM at U3 on an original Gottlieb System 3 MPU board. These modules use CYPRESS F-RAM nvram ICs rated at 151-year data retention & 100 trillion reads/writes. Absolutely no batteries are needed to retain your high scores or game settings, you can remove them from your game. Machine pin headers are used on this module which are very durable and won't damage your socket at all.

 

REQUIRES SOLDERING / MODIFICATION OF MPU!
Please note that upgrading to nvram on Gottlieb System 3 MPUs will require modification of the MPU board as noted below.

 

  1. Remove the Dallas 1210 chip marked "U6" on the board
  2. Add two wire jumpers at the U6 footprint per instructions
  3. Remove the soldered RAM at U3 and install the 28-pin IC socket in its place
  4. Remove lithium coin cell battery from board
  5. If the board was previously using a 6116 (24-pin) RAM, swap the JP3 wire jumper to the JP4 position
  6. Install the new NVRAM into the IC socket, making sure to orient the notch of the chip properly

If you don't have soldering experience or aren't comfortable modifying your board (AT YOUR OWN RISK) then you should hire a professional to do this upgrade for you or leave your board as-is and replace the lithium battery instead if your game is no longer holding high scores. The Gottlieb System 3 boards have thin traces and are a bit more fragile than some boards, so you MUST have decent soldering equipment and technique for successful installation of the NVRAM.

 

WHY REPLACE YOUR EXISTING RAM WITH NVRAM?
Unfortunately battery corrosion damage is much too common in games that used alkaline batteries for powering the RAM when the pinball machine is off. Many people have reported that even new batteries from major brands can sometimes leak after a year or two for no apparent reason. The corrosive alkaline can leak or wick into the board and over time will destroy the copper traces on the board and any ICs it comes in contact with. Don't let this happen to your game!

Compatibility:

  • Barb Wire
  • Cactus Jack's
  • Car Hop
  • Caribbean Cruise
  • Class of 1812
  • Cue Ball Wizard
  • Deadly Weapon
  • Frank Thomas' Big Hurt
  • Freddy A Nightmare on Elm Street
  • Gladiators
  • Lights...Camera...Action!
  • Mario Andretti
  • Operation: Thunder
  • Rescue 911
  • Shaq Attaq
  • Silver Slugger
  • Stargate
  • Street Fighter II
  • Strikes 'N Spares
  • Super Mario Bros.
  • Super Mario Bros. Mushroom World
  • Surf 'n Safari
  • Tee'd Off
  • Title Fight
  • Vegas
  • Waterworld
  • Wipe Out
  • World Challenge Soccer

NVRAM is shipped in anti-static foam & anti-static bag. Installation PDF instructions are here.

Ask a question about this product
1
1
This product was added to our catalog on 02/12/2019.
First Product Previous Product 2 of 9 in Pinitech - NVRAM & more! Next Product Last Product
 Shopping Cart more
0 items
 Sign in

Password forgotten
Create an Account
 My Wish List more
0 items
 Information
Printable Catalog
Site Map
 Bestsellers
01.Box of #47 bulbs
02.BLUE ESR Meter - KIT
03.Gottlieb Game or Sound PROM/EPROM/GALs
04.Guide Rings
05.Trifurcon pins 08-52-0113
06.Box of #44 bulbs
07.Bally/Stern Replacement Rectifier Board
08.ACTUATING LEVER K7
09.Bally/Stern - Alltek Ultimate MPU
10.Centre Cone CD-PRO2

RoHS - We wish to inform you that most of the products sold on our web site do not comply with the Restriction of Hazardous Substances (RoHS) Directive.
Only individual products listed specifically as RoHS compliant may be assumed to be compliant.
We ask for your understanding and cooperation.
All content and Images Copyright © 2019 Flipper's Parts Store
Copyright © 2000 - 2019 osCmax
Powered by osCmax v2.5.4